59 research outputs found
Numerical Study on Mechanism of Nanoparticle Formation in High Temperature Reactor
Properties of nanoparticles are size-dependent, therefore nucleation and growth of particle is often
difficult. The population balance model has been developed to study the mechanism of nanoparticles
formation in high temperature reactor. Processes responsible for particle formation and growth
are considered by homogeneous nucleation, condensation and Brownian coagulation. Parameters
such as temperature, residence time and reactant concentrations influencing particle size are investigated.
The population balance model is the dynamic model that describes the evolution of the
aerosol size distribution with time. The method of moments was used to solve the dynamic equation
under the assumption of log-normal size distribution. The model was validated with existing model
Simulation and control of nanoparticle size distribution in a high temperature reactor
This work focuses on the modeling, simulation and control of particle size distribution (PSD) during
nanoparticle growth with the simultaneous chemical reaction, nucleation, condensation, coagulation and
convective transport in a high temperature reactor. Firstly, a model known as population balance model
was derived. This model describes the formation of particles via nucleation and growth. Mass and energy
balances in the reactor were presented in order to study the effect of particle size distribution for each
reaction mechanisms on the reactor dynamics, as well as the evolution of the concentrations of species and
temperature of the continuous phase. The models were simulated to see whether the reduced population
balance can be used to control the particle size distribution in the high temperature reactor. The simulation
results from the above model demonstrated that the reduced population balance can be effectively
used to control the PSD. The proposed method “which is the application of reduced population balance
model” shows that there is some dependence of the average particle diameter on the wall temperature
and the model can thus be used as a basis to synthesize a feedback controller where the manipulated
variable is the wall temperature of the reactor and the control variable is the average particle diameter at
the outlet of the reactor. The infl uence of disturbances on the average particle diameter was investigated
and controlled to its new desired set point which is 1400nm using the proportional-integral-derivative
controllers (PID controllers). The proposed model was used to control nanoparticle size distribution at
the outlet of the reactor
The properties and the effect of operating parameters on nickel plating (review)
The energy required in an electroplating process and the material costs are important considerations in product manufacturing. The most important plating criteria, however, are quality and the uniformity of the deposited metals. The nickel plating process is used extensively for decorative, engineering, and electroforming purposes. Because of the appearance and other properties of the electrodeposited material, nickel deposition can be varied, over a wide range, by controlling the composition and the operating parameters of the plating solution. Decorative applications account for about 80% of the nickel consumed in plating; 20% is consumed for engineering and electroforming purposes. Autocatalytic (electroless) nickel plating processes are commercially important but are outside the scope of this review. In this review, the basic facts of nickel electroplating processes, thickness test and methods, are discussed. The properties of nickel and the different effects of the operating parameters on nickel plating, together with the simulation and design tools, are also reviewed. Simulation tools can help to obtain better plating results. Non-destructive techniques to evaluate the coatings on a microstructural and the technical evaluation with TEM, SEM, XRD and other techniques were also reviewed
Porous and fractal analysis on the permeability of nanofiltration membranes for the removal of metal ions
Porous and fractal analysis on the permeability
of nanofiltration membranes was investigated for the
removal of metal ions. The permeability of a porous
membranes used in wastewater treatment is strongly
depended on its local geometry and connectivity, the size
distribution of the pores available for flow. Fouling studies
with two different membranes at three different pHs were
carried out with manganese and magnesium. It was shown
that the tighter membrane was less rougher and less fouled
compared with the rougher membrane. NF90-2450 showed
the highest degree of fouling. The X-ray diffraction showed
that NF90-2540 consist of a pronounced diamond at the
angle of 45 �C which was responsible for porosity. The
threshold images were obtained from the scanning electron
microscopy images with the use of Image J software confirmed
that NF90-2540 has higher percentage porosity
when compared with the percentage porosity of NF1540-3.
An evaluation of the relationships between porosity and
permeability for the fractal analysis by a box counting was
done. The evaluation also confirmed that the lower fractal
dimension corresponds to a lower value of porosity. The
higher the pH, the lower the fractal dimension of the used
membranes due to the blockage of pores. A higher value of
fractal dimension of the used membrane at a lower pH
corresponds to a lower rejection of the metal ions
Rheological Properties of Polymers: Structure and Morphology of Molten Polymer Blends
The article reviews a brief literature on the rheological properties of polymer melts and blends. Experimental results on polymer blends are summarized. Technically, vital types of multi-phase polymers such as compounds and blends are discussed. The importance of the rheological properties of polymer mixtures in the development of the phase structure is discussed. And the importance of considering the stress and/or strain history of a material sample in a rheological investigation is discussed. Finally, the outlook on the past, present and future developments in the field of polymer rheology are given. The review concludes with a brief discussion on the opportunities and challenges in the field of polymer blends and blend rheology
Numerical Simulation for Nanoparticle Growth in Flame Reactor and Control of Nanoparticles
We review the models and numerical methods used in flame reactor for the modeling and simulation
of nanoparticle. And we also review the control of nanoparticle size distribution, some nonlinear
control strategies were looked into. A general model in which nanoparticles form in gas phase and
grow through chemical reaction, nucleation, condensation and coagulation is discussed. Particles
dispersed in a fluid move randomly, due to Brownian motion, and, along their trajectories, they
collide with each other. The model is formulated in terms of a detailed population balance which
describes how aerosol size distribution evolves with time. For this population balance models a
number of different numerical approaches exist. We reviewed sectional, finite element and Monte
Carlo methods, method of moment
Theoretical performance of nanofiltration membranes for wastewater treatment
Mechanisms of ionic transport in nanofiltration
are poorly known. Modelling can be used to predict
membrane performance, to reveal separation mechanisms,
to select appropriate membranes, and to design processes.
Several models have been proposed to describe nanofiltration
membranes. Some models rely on simple concepts,
while other models are more complex and require sophisticated
solution techniques. Here, we review predictive
models used for characterizing nanofiltration membranes
for the separation of wastewater. The most popular model
uses the extended Nernst–Planck equation, which describes
the ionic transport mechanisms in details. Results obtained
by using the extended Nernst–Planck equation show that
the performance of nanofiltration membranes is strongly
dependent on charge, steric, and dielectric effects
Novel Systems and Membrane Technologies for Carbon Capture
Due to the global menace caused by carbon emissions from environmental, anthropogenic, and industrial processes, it has become
expedient to consider the use of systems, with high trapping potentials for these carbon-based compounds. Several prior studies
have considered the use of amines, activated carbon, and other solid adsorbents. Advances in carbon capture research have led to
the use of ionic liquids, enzyme-based systems, microbial filters, membranes, and metal-organic frameworks in capturing CO2.
*erefore, it is common knowledge that some of these systems have their lapses, which then informs the need to prioritize and
optimize their synthetic routes for optimum efficiency. Some authors have also argued about the need to consider the use of hybrid
systems, which offer several characteristics that in turn give synergistic effects/properties that are better compared to those of the
individual components that make up the composites. For instance, some membranes are hydrophobic in nature, which makes
them unsuitable for carbon capture operations; hence, it is necessary to consider modifying properties such as thermal stability,
chemical stability, permeability, nature of the raw/starting material, thickness, durability, and surface area which can enhance the
performance of these systems. In this review, previous and recent advances in carbon capture systems and sequestration
technologies are discussed, while some recommendations and future prospects in innovative technologies are also highlighted
- …